- 2 Heat Settings | Our Electric Heater has 2 heat settings(750W-1500W). Designed with advanced infrared heating system and the gold-coated tubes. Fast heating in 3 seconds. BTU: 5100
- Easy Assembly | You only need to install the accessories on the back to nail it to the wall or ceiling. The angle of mounting can be adjusted. There are three screw slots and the adjustment range is 0-45 degrees, each of which is 15 degrees.
- Waterproof & Anti-dust | Our products have excellent waterproof and dust-proof performance, aluminum alloy housing (IP65). It can be used both indoors and outdoors, such as porch garage and etc.
- Remote Control | This wall-mounted space heater can be operated remotely and manually, requires 2 x AAA batteries (not included).
- Quiet Operation & ETL Listed | The infrared heater is working silently. It will not disturb you while you are sleeping. It is manufactured under strict quality standards and pass ETL certificate.
Wall Mounted Electric Heater -Warm your winter
Heating Range Diagram
Because in the actual use process, the heating range is greatly affected by the environment.
In order to ensure the accuracy of product description, we only provide a reference diagram of the heating range.
- The product can be used outdoors, but only for courtyards, porches, or places with a canopy on top
- It must be heated at least 11.8 in from the ceiling, 20in from the side wall and 70in from the floor
- Do not immerse the heater in water or let water enter the inside of the heater, otherwise there will be a risk of electric shock
- Power: 750W/1500W
- Certificate: ETL
- Lifespan: around 5,000 hours
- BTU: 5100
- Power Cord: 70.8in,16AWGx3C
- Weight: 5.51 lbs
- Size: 28.3in x 4.7in x 4.7in
- Voltage: 120V, 60Hz
Loosen the two screws to easy adjust the veritical angle of heater. It can be adjusted 45 degrees up and down.
This product does not require assembly. You only need to install the accessories on the back to nail it to the wall.
Three Prong Ground
5.9 feet long power cord. Ideal for family use
How to install
There are two ways for installation.
The rectangular small piece(part-1) is installed selectively.
1. Use part-1 & part-2 .The heater could be removed. Four screws are installed in Part-1, insert part-2 into part-1, then fix with butterfly screw.
2. Only use part-2. Four screws are installed in Part-2.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.